Veratron VL Flex 52
- All-in-one / universal / contactless device configuration / all-rounder
- Directly read from your analog engine sensors
- SAE J1939 interface
- Screen dimension: 1.44" TFT
- Nominal Voltage: 12V / 24V
- Bezel Color: Black
- Diameter: 2 1⁄16" (52mm)
- Functions: Coolant Temperature, Oil Pressure, Fuel Level, RPM, Clock (See full list below)
- Connectivity: LIN, SAE J1939
- Click Here to open operating instructions
- For User Manual click: J1939
- Series: VL Flex
Functions:
| Rudder | Battery | Compass | Clock |
| Engine revolution | Depth | Exhaust gas temperature | GPS |
| Wind | Sea temperature | Outside temperature | Fresh water level |
| Fuel level | Oil temperature | Coolant Temperature | Air pressure |
| Boost pressure | Transmission oil pressure | Engine oil pressure |
Veratron was established to serve its customers with high quality, cost competitive products. With 50 years experience developing robust designs for the marine, power sports, automotive and industry markets, you can rely on us to provide product performance that is technically outstanding.
Product Details
- The ViewLine Flex gauge features a sun-readable 1.44" TFT display to always show your preferred data. Wireless configurable through your mobile device, the J1939 compatible device makes all your data available to the digital instrumentation of your vessel. It offers three configurable inputs (1x 0 5 V, 1x 0 1 K Ω, 1x frequency) designed to directly connect and display different values such as water temperature, oil pressure, fuel level, RPM, or depth.
- Nominal voltage: 12v / 24v
- Operating voltage: 9v - 32v
- Current consumption: 50 mA (Maximum backlight intensity)
- Protection class: IP 67
- Dimensions: 60 mm (outer) 52 mm (mounting hole)
- Front ring: Polycarbonate, black
- Front lens: PMMA with anti-glare and anti-fog treatments
- Display: 1.44” sun-readable color TFT display
- Resolution: 125 x 125 pixels
- Analog inputs: 1x resistive / 1x frequency
- Connector: Tyco / Hirschmann MQS connector 8 pin
- Digital ports: SAE J1939, LIN bus
- Wireless interface: NFC
- Operating temperature: -20°C to +70°C
Veratron's new VL Flex 52 - J1939 was designed to meet the rigorous demands of commercial use. Supporting a broad range of sensors, the all-in-one 1.44’’ round gauge is singularly unique in that it can display two sets of diesel engine data simultaneously and is easily configured using a mobile device and the companion Veratron app.
The VL Flex 52 - J1939 supports input from analog sensors as well as J1939 and LIN 2.0. The simple but effective graphic design can be set up in a single or dual layout, pulling from up to 30 sets of data. It can display a large numerical value and colored bar graph that are viewable in any light condition due to its sun-readable PMMA lens with anti-glare.
Waterproof to IP67 standards, the VL Flex 52 - J1939 has a flame-retardant polycarbonate 2’’ (52mm) housing. Installation choices include flush mount or standard spinlock with additional front ring bezel colors available. It connects via an 8-pin Tyco/Hirschmann MQS plug.
The VL Flex 52 - J1939 runs off 12v / 24v and features over-voltage and reverse polarity protection, yet only draws 50mA with backlight intensity set to maximum. It complies with CE, UKCA, Reach, RoHS and UL requirements.
Configuring the VL Flex 52 – J1939 is as simple as tapping. Selections are chosen in the Veratron app then the mobile device is held close to the gauge. An embedded passive NFC receiver and antenna provide setup without the need for a power supply.
Highly adaptable, among the 29 types of data the VL Flex 52 - J1939 can display are Brake Pressure, AdBlue, engine, battery, tank and performance values. It can also be configured to set alarms. When a preset threshold is met and the alarm triggered, the bar graph or numeric value will turn bright, eye-catching red.
